Future Technological Advancements Influenced By Strategies

The first strategy is one approach which should be limited is the effect of a springboard upon on vault apparatus. This should have been kept to the minimum because having fewer springs within the springboard enables gymnasts to fly higher into the air.

The better the vault, the more flight & velocity you have. This means that perhaps the gymnasts simply need to understand how to jump mostly on board correctly to the vault. Instead, a gymnast should be able to accomplish the vault without relying on the momentum of the springboard. Limiting the number of springs inside the board makes vaulting more equal because advanced gymnastics requires strength and momentum from sources other than the board. This is one method of limiting future gymnastics technological developments.

Gymnastics Australia, the USA, and other organisations’ safety rules may limit future technological advances in gymnastics. These limitations may limit future technological developments in places such as the equipment, bars, vault, floors, bars, and beam. They could, for example, strive to lessen the bounce with in-floor, which makes tumbling passes extremely difficult for gymnasts. Gymnastics Australia wishes to reduce this because it reduces the possibility of gymnasts being gravely injured when trying skills that are only feasible due to bouncing on the floor.

They might want to impose laws that limit its beam height for each level because of lower the beam, the less likely it is that someone may injure themselves. These restrictions would inhibit future technological advances in gymnastics by prohibiting inventors from devising innovative methods to improve the apparatus.
third strategy

The final technique that might boost future technological progress is the development of new materials. New materials may change the way grips were made. This could mean that your hands have fewer rips or that purchasing grips become less expensive. The floor may be renovated using new materials to increase bounce and lessen the impact, mostly on the gymnast’s body. New materials could be added to a springboard to make it much more bouncy & comfortable for a bounce.

New materials may demand a new beam cover. Gymnasts could perform larger and greater routines because the beam will still have new stuff on this to make it softer to fall on. This could also improve the safety of performance upon on beam because if the materials soften the beam, there is less chance to break it when you fall & contact the beam.

Leave a Reply

Your email address will not be published. Required fields are marked *

CommentLuv badge